Raw Material Poly Dl-Lactide-Co-Glycolide

$115——290 USD

Products Description Reborn is a collagen biostimulator that provides improved skin quality more deeply and effectively! Proven type I collagen increase of 66.5% after 3 months of the first session. Reborn is indicated for face and body treatment and has proven long duration of up to 25 months. The process of Reborn treatment includes the use of fine needles to inject poly l-lactic acid into the skin in a strategic mode to prevent wrinkles and fine lines and facial fat atrophy. Poly l-lactic...

$ 6 - 8 Gram

PCL is a kind of polymer with mechanical properties (biomedical materials, medical grade polymers), shape memory and biodegradability. It is also a kind of biocompatible, absorbable and low-cost synthetic polymer. Our PCL are currently widely used in many fields(medical devices), such as injected glaucoma drug, coatings, ophthalmic implant, dermal fillers, absorbable vessel clip, cosmetics (beauty and personal care products) etc.

$ 7.5 - 9 Gram

Pharmaceutical Grade Material Poly L-lactide-co-glycolide PLGA is biocompatible and biodegradable, exhibits a wide range of erosion times, has tunable mechanical properties and most importantly, is a FDA approved polymer（medical grade polymers）. In particular, PLGA has been extensively studied for the development of devices (medical devices) for controlled delivery of small molecule drugs, proteins and other macromolecules in commercial use and in research. This manuscript describes the various...

$ 10 - 8 Gram

Medical Use Drug Delivery Raw Materials Pdlga The degradation products of PDLGA are lactic acid and glycolic acid, so when it is used in medicine and biological materials, there will be no. Through the adjustment The whole monomer ratio, and then change the degradation time of PDLGA, this method has been widely used in the field of biomedicine, can be used as anti-adhesion in medical surgery Membrane, skin transplantation, wound suture, microcapsules for injection (dermal fillers), in vivo...

$ 13 - 9 Gram

Polyglycolide (PDLGA), also known as polylactic acid-glycolic acid copolymer, polylactic acid-glycolic acid copolymer. Two kinds of monomer milk. It is formed by random polymerization of acid and glycolic acid. It is a degradable functional polymer organic compound with good biocompatibility, non-toxicity, and good Good encapsulation and film-forming properties are widely used in pharmaceuticals, medical engineering materials and modern industrial fields. PLGA approved by FDA in the U.S. The...

$ 7.8 - 9 Gram

Cas Number 26780-50-7 PDLGA Poly(d,l-lactide-co-glycolide) PDLGA-Poly(d,l-lactide-co-glycolide) is one of medical grade polymers. It is one of biodegradable, bioabsorbable Biomedical materials. It can be used for lifting thread (medical devices), drug delivery. Some one also would like to try use it for dermal fillers, beauty equipments etc. Product describtion Application

$ 10 - 15 Gram

Biomedical materials: medical grade poly-l-lactic acid PLLA, PLGA,PDLGA,Material Medical Grade Polycaprolactone PCL,etc. Medical Grade Polymers: Biodegradable Polylactic Acid, Product describtion Biodegradable Medical Grade Raw Material Poly(L-lactide-co-glycolide)(PLGA) Application Related products Company Profile Rimless Industry Co., Ltd.(RIMLESS) is devoted to the global brand operating and integrating, sale and after-sale services of biomedical materials, regenerative aesthetic...

$ 10 - 8 Gram

Polylactide (Poly(lactic acid), PLA) is polymer obtained by the ring-opening polymerization of lactide (cyclic dimer of lactic acid) as monomer. Since lactide has 3 optical isomer as L-lactide, D-lactide, and DL-lactide, the polymers obtained from L-lactide, D-lactide, and DL-lactide are abbreviated to PLLA, PDLA, and PDLLA, respectively. The chemical properties of L-lactide and D-lactide are the same while their steric structures are different, PLLA polymer and PDLA polymer have the same...

$ 5 - 8 Gram

Biodegradable Raw Material (Pla Medical Grade) Plla Resin Rimless Offer medical grade polymers PLLA, PDLA, PDLLA, PCL, PLGA, PDLGA etc. PLLA (Poly-l-lactic acid) are the biomedical materials, they are widely used in medical industry such as Medical Devices -- Dermal Fillers, Absorbable Sutures, Tissue Scaffolds, Drug Delivery etc.

$ 7 - 9 Gram

PLLA(poly-l-lactic acid) is one of Medical Grade Polymers Raw Material, which is found in the corn. It can degraded into water and carbon dioxide, it is safe to human body. It is widely used in medical devices and injectable aesthetic such as the dermal fillers. Product describtion Regeneration Raw Materials Biodegradable Polylactic Acid PLLA IV = Intrinsic viscosity MV = Viscosity molecular weight Application

$115——240 USD

Reborn PLLA Dermal Fillers are widely used as Beauty Equipments. It's main ingredient is Poly-l-lactic acid, which is one of the biomedical materials. Poly-l-lactic acid, is a biocompatible, biodegradable substance that is gradually and naturally absorbed by the body and widely used for Medical devices . Reborn plla dermal filler is collagenesis filler that stimulates collagen inside of skin to induce collagenesis and improves wrinkles and volume losses

$115——240 USD

Reborn PLLA Dermal Fillers are widely used as Beauty Equipments. It's main ingredient is Poly-l-lactic acid, which is one of the biomedical materials. Poly-l-lactic acid, is a biocompatible, biodegradable substance that is gradually and naturally absorbed by the body and widely used for Medical devices . Reborn plla dermal filler contains poly-L-lactic acid, which is a biocompatible, biodegradable substance that is gradually and naturally absorbed by the body and commonly found in dissolvable...

$ 7 - 9 Gram

Shape Memory Resin Polymer Suture Material Polycaprolactone PCL is a biocompatible, biodegradable, bioresorbable polymer, an aliphatic polyester belonging to the poly-α-hydroxy acid group, in the same chemical group as polylactic and polyglycolic acids. We Rimless offer biomedical materials--medical grade polymer: poly-l-lactic acid, poly-d-lactic acid, polycaprolactone, Poly(lactic-co-glycolic acid), Poly(dl-lactic-co-glycolic acid) etc. These materials can be used for medical devices, such as...

$ 7 - 9 Gram

Lifting Thread 3d Printing Material PCL Polycaprolactone PCL (one of medical grade polymers) is used in various forms such as film, fibers, and micro-particle. The chemical formula of PCL is (C6H10O2)n. PCL is suitable to fabricate long term implant systems. In addition to tissue engineering applications, PCL is also highly used for various drug delivery applications. We Rimless offers Flocculent Form PCL, you can see it at the following photo. As we know that PCL is one of biomedical...

$ 7 - 9 Gram

3d Printing Pellets Polycaprolactone With Shape Memory Polycaprolactone (PCL) is a biodegradable polyester with a low melting point of around 60 °C and a glass transition temperature of about −60 °C. We Rimless offer biomedical materials--medical grade polymer: poly-l-lactic acid, poly-d-lactic acid, polycaprolactone, poly(lactic-co-glycolic acid), poly(dl-lactic-co-glycolic acid) etc. These materials can be used for Medical devices, such as absorbable sutures, dermal fillers; Beauty equipments...

$ 7 - 9 Gram

Cas No. 24980-41-4 Shape Memory Polymer Polycaprolactone We Rimless offer biomedical materials--medical grade polymer: poly-l-lactic acid, poly-d-lactic acid, polycaprolactone, Poly(lactic-co-glycolic acid), Poly(dl-lactic-co-glycolic acid) etc. These materials can be used for medical devices, such as absorbable sutures, dermal fillers; drug delivery etc. PCL is also one shape memory polymer, it can be used with 3D printing technology for beauty equipments, tissue scaffold etc. Product...

$ 7 - 9 Gram

99.9% Purity 3D Printer Polylactic Acid PLA Powder Poly l-lactic acid is one medical grade polymer, you may know it at the aesthetic market as it is the main ingredient of Reborn PLLA Dermal Filler. We Rimless offer biomedical materials: poly-l-lactic acid, poly-d-lactic acid, polycaprolactone, Poly(lactic-co-glycolic acid), Poly(dl-lactic-co-glycolic acid) etc. These materials can be used for medical devices, such as absorbable sutures, dermal fillers; Beauty equipments via 3D printing...

$ 7.5 - 9 Gram

Biodegradable Plastic Shape Memory PCL Pellets Polymer Poly-ε-caprolactone (PCL) is polymer obtained the ring-opening polymerization of ε-caprolactone as monomers. PCL is one of medical grade polymers (biomedical materials), it can be used for medical devices (dermal fillers, lifting thread), drug delivery. It also can be used for Beauty Equipments, Plastic Surgical and Dermatology. We also supply some other medical grade polymers, such as plla, pdla, plga, you could contact us for more...

$ 12 - 15 Gram

Polylactide (Poly(lactic acid), PLA) is polymer obtained by the ring-opening polymerization of lactide (cyclic dimer of lactic acid) as monomer. Since lactide has 3 optical isomer as L-lactide, D-lactide, and DL-lactide, the polymers obtained from L-lactide, D-lactide, and DL-lactide are abbreviated to PLLA, PDLA, and PDLLA, respectively. The chemical properties of L-lactide and D-lactide are the same while their steric structures are different, PLLA polymer and PDLA polymer have the same...

$15.99——20.99 USD

Product Description Packing & Delivery Company Profile Rimless Industry Co., Ltd. (RIMLESS) is devoted to the global brand operating and integrating, sale and after-sale services of biomedical materials, high-end medical devices, regenerative aesthetic products, cosmetics and beauty tools. RIMLESS is the exclusive distributor, exporter and global brand licensor of REBORN. We take REBORN and RIMLESS as the core brands, biomedical materials and their applications in the medical field as the...